connect litter robot to WiFi

How to Connect Litter Robot to WiFi? Connect Effortlessly

The Litter-Robot is the undisputed expert in the Litter-Robot Connect app, Modern pet care. It will get a lot better. Connecting your Litter-Robot to WiFi is easy. This article will explain how. Experience the future of pet care now by understanding how to connect Litter-Robot to WiFi.

Why isn’t my Litter-Robot connecting to WiFi?

Troubleshooting is crucial if your Litter-Robot fails to connect to WiFi. First, ensure the Litter-Robot system is compatible with your WiFi and internet. Verify your WiFi network credentials and double-check because one small mistake can break the connection. Ensure the device is in ‘WiFi hotspot’ mode, reset it, and is placed closer to the router.

Check to see if the app on your smartphone has automatic onboarding mode and is compatible. Update the software regularly. Look for anything that might interfere between the Litter-Robot and the router. Make sure your WiFi router is on and functioning. For a successful connection, ensure your phone is within the Litter-Robot’s range and connected to the same network.

How to Connect Litter Robot to WiFi?

Follow these steps to connect your Litter-Robot to WiFi using the Whisker app. If the first method doesn’t work, try the alternatives below for a successful connection.

Step 1- Install the Whisker app.

  • Getting the app is easy. Just download it from Google Play or Apple App Store. Make sure you have a valid email address and password before installing and launching the app.

Step 2- Complete the Onboarding steps.

  • Before configuring the Whisker app, set up your Litter-Robot properly:
  • Hold the ’empty’ and ‘cycle’ buttons until the power button turns blue to activate the Hotspot.
  • Scan the barcode and name your robot.
  • Use the Whisker app to input your WiFi network password.
  • Confirm the successful connection – the unit will cycle, and the app will display success.

Step 3- Check your router.

  • Ensure your Litter-Robot is in the WiFi router’s coverage area.
  • Clear obstructions between the robot and router.
  • Move the litter robot closer to the router or remove obstacles.
  • Verify router activity and restart if necessary.
  • Connect the same internet connection with your phone.

Step 4- Restart the Litter-Robot App.

  • Close and reopen the app for the final setup.

These steps should guide you through connecting your Litter-Robot to WiFi using the Whisker app. For more help, contact customer support if you run into issues.

How Do I Reset My Litter-Robot Connection?

  • Unplug and replug- First, unplug the Litter-Robot from the power source and wait 30 seconds. Then, plug it back in.
  • WiFi light blink- Watch for the green WiFi light on the Litter-Robot. It should start blinking.
  • The WiFi button should be held down for 5 seconds, then released, followed by the RESET button for 10 seconds, then released.
  • Wait for connection- Allow the Litter-Robot to reconnect to your network. When the green WiFi light remains lit, you’ll know it’s successfully connected.

How to Use the Litter-Robot App for WiFi Setup?

  • When the Litter-Robot is in setup mode, hold down the ‘Reset’ button for about five seconds. This action activates the setup mode.
  • Select litter-robot model- Open the Litter-Robot app on your smartphone or tablet. From the available options, select your specific Litter-Robot model.
  • Connect to temporary WiFi- The app will prompt you to connect your mobile device to the Litter-Robot’s WiFi network. Your Litter-Robot creates this network during the setup process.
  • Minimize the Whisker app- Once your device is connected to the Litter-Robot’s temporary network, minimize it, but keep it running in the background.
  • Access WiFi settings- On your mobile device, locate the settings icon and tap it.
  • Select WiFi- In the settings menu, tap on ‘WiFi.’
  • Find Litter-Robot SSID- Scroll through the list of available WiFi networks until you locate the Litter-Robot’s SSID (Service Set Identifier). To find it, you should scroll down.

How to Use the Litter-Robot App for WiFi Setup?

What Are Common Issues During WiFi Setup and How to Solve Them?

Lack of network coverage- Caused by poor network design.

  • Solution- Install more access points or repeaters to extend coverage.

Saturation of simultaneous connections- Occurs when too many devices consume bandwidth.

  • Solution- Limit device connections or use network management tools to prioritize traffic.

No guest networks- This poses security risks and affects main network performance.

  • Solution- Create separate guest networks with unique access credentials and restrictions to enhance security and prevent performance degradation.

How to Maintain a Stable WiFi Connection for Your Litter-Robot?

A few crucial procedures must be taken to maintain your Litter-Robot’s WiFi connection strong. Place the device close to your router or WiFi extender to obtain a strong and reliable signal.

Ensure it is plugged in and the initial Clean Cycle has been successfully finished. Please verify that your WiFi is active by frequently checking its status.

Verify that WiFi is turned on on both your router and the Litter-Robot. By following these easy instructions, you can ensure a dependable connection that will enable you to easily manage and monitor your Litter-Robot using the app for a hassle-free experience providing pet care.


Why is my Litter Robot 4 WiFi flashing blue?

  • Insufficient power- Make sure the device is getting power by plugging the power cord into an outlet that works properly.
  • Full waste drawer- The blue light may turn on if the waste drawer is full. It can be resolved by emptying it.
  • Motor blockage- The blue light may also flash due to a clogged motor. Check for blockages and remove them if you find any.

How do I Change the WiFi on my iRobot app?

Connect to the desired network- Ensure your mobile device is connected to the WiFi network on which you want to set up your iRobot.

Access WiFi settings- Open the iRobot HOME App and go to the CLEAN screen. Choose ‘Settings’ and then ‘WiFi Settings’ from there.

Change product WiFi- Select the option that says, ‘Change Product WiFi’.

Enter network password- If prompted, enter the password for the new WiFi network. To finish the setup procedure, adhere to the on-screen instructions.

Why is the yellow light flashing on my Litter-Robot 3 connect?

  • Various issues can be indicated by a flashing yellow light on your Litter-Robot 3 Connect.

  • In the middle of the cycle, your cat entered the Litter-Robot.

  • There was a removal of the bonnet.

  • The Anti-Pinch Sensors were activated.
  • The motor detected an obstruction or jam.
  • There is a pinch condition, typically an obstruction in the waste port.

If the yellow light flashes quickly, it’s likely an interrupted cycle due to the Anti-Pinch Safety Feature. If it flashes rapidly, turn off the Litter-Robot and inspect the waste port for obstructions.

Here’s An Interesting Video To Watch,

VIDEO CREDITS: Cat Evolution YouTube Channel

You May Also Like

Similar Posts

Leave a Reply